Anchor Window
The Anchor Window of the Build Bones Tool is where you mark a character's joints on a 2D view so that UModeler X can build and weight its skeleton.
The Anchor Window is where you show the Build Bones Tool where the joints of your character are. Open it with Open Anchor Window in the Build Bones tool options. Its tab reads Build Bones and its header Place Joints (2D Anchors).
You mark each joint on a flat view of the model — the front of a humanoid, the side of an animal — and the window works out the depth for you. It looks through the model along the view direction and places each joint inside the body: limb joints in the middle of the limb, skipping thin layers such as clothes or hair in front of it, and torso joints at spine depth. Suggested positions are filled in when the window opens, so for many models you only move a few marks and click Apply.
Window layout
| Area | Contents |
|---|---|
| Header | Place Joints (2D Anchors) and the body type badge, Humanoid or Quadruped. |
| View rows | Set Front (or Set Side) slider with -90°, +90°, 180° and Reset. Up Axis, Pitch and Roll for the model's orientation. |
| Hint line | What to do in the current view. |
| Tool row | Character faces (Humanoid) or Head (Quadruped), Symmetry, Reset Centerline, Suggest Again, Undo, Start Over. |
| Viewport | The model with your marks, the centerline and the bone lines. The lower corners show which side is which. |
| Under the viewport | Mouse help for the current view and the legend. |
| Right panel | Tail, Depth and Fingers toggles, the Joints list, a description card, the hand panel, Things to Check, and Apply. |
Orienting the model
The window opens looking at the model from +Z, with world up as up. Before you place joints, make sure you are looking at the right side of the model.
Set Front and Set Side
Drag the slider (−180° to 180°) to turn the view around the model's up axis, or click -90°, +90° or 180°. Reset turns the view back to where it started.
- Humanoid — the slider is Set Front. Turn the model until the character's front faces the screen. The side you see is rigged as the front.
- Quadruped — the slider is Set Side. Turn the model until the animal's side faces the screen.
Up Axis, Pitch and Roll
Up Axis shows which local axis of the mesh is treated as up, for example +Y. If the model lies on its side or its back, stand it up here:
- Pitch -90° / +90° tips the top of the model toward or away from you.
- Roll -90° / +90° turns the model counterclockwise or clockwise on the screen.
- Reset returns to the default: world up is up and the view looks from +Z.
Changing the orientation starts the marks over from new suggestions — click Undo to go back. These buttons work in the main view only, the front of a humanoid or the side of an animal.
If the up axis you set here is not the world up axis, Things to Check warns that the bones will lie sideways in the scene.
Character faces (Humanoid)
| Option | Description |
|---|---|
| Toward Screen | The character faces the screen: its left side is on the screen's right. Default. |
| Away from Screen | The character's back faces the screen: its left side is on the screen's left. |
The lower corners of the viewport read Character's left and Character's right.
Head (Quadruped)
Left or Right — the side of the screen the head is on. It is set from the suggestion when the window opens. The viewport corner shows ← Head or Head →.
Placing joints
Joints list
The Joints list shows the joints of the current view in placing order. Click a joint to make it the current one — the joint that a click in the viewport places.
- The dot in front of a name is empty while the joint is not placed. Once placed, it is green, yellow or red like the joint dots in the viewport.
- Suggested marks a joint whose position is an automatic suggestion you have not moved.
- With Symmetry on, each left-right pair of a humanoid is one row, such as Elbow, and shows which side its mark is on.
Under the list, a card shows the current joint on a body figure, with a one-line hint about where it goes.
| Humanoid joint | Where to place it |
|---|---|
| Pelvis | Middle of the pelvis, a little above where the legs split. |
| Chest | Middle of the chest, a little above the solar plexus. |
| Neck | Where the neck starts, just above the shoulder line, in the middle. |
| Head (Chin) | In the middle of the body, at chin height. |
| Shoulder | The shoulder joint, where the arm meets the torso. |
| Elbow | Middle of the elbow joint. |
| Wrist | The wrist, where the hand starts. |
| Hip | The hip joint where the leg starts, at crotch height. |
| Knee | Middle of the knee. |
| Ankle | The ankle, just above where the top of the foot starts. |
| Tail Start / Tail End | Where the tail leaves the body, and the tail tip. Only with Tail on. |
| Quadruped joint | Where to place it |
|---|---|
| Pelvis | The pelvis, over the hind legs near the back. |
| Chest | The chest, over the front legs near the back. |
| Neck | Middle of the neck. Optional — without it, no Neck bone is made. |
| Head | Where the head meets the neck, behind the ears. |
| Front Shoulder / Front Elbow / Front Ankle | The shoulder, elbow and ankle of the front leg. |
| Hind Hip / Hind Knee / Hind Ankle | The hip, knee and ankle (the hock) of the hind leg. |
| Tail Start / Tail End | Where the tail leaves the body, and the tail tip. |
For a quadruped you place each leg joint once in the side view, and it is split into left and right.
Mouse and keys
| Action | Result |
|---|---|
| Click, or press and drag, on an empty spot | Places the current joint. When you release the button, the next empty joint becomes current. |
| Drag a mark | Moves it. A magnifier shows the area around the pointer at 3×. |
| Right-click a mark | Removes it. |
| Delete / Backspace | Removes the mark of the current joint. |
| Hold Alt while placing a torso joint | Places it freely. Otherwise torso joints stick to the centerline. |
| Ctrl + Z (macOS Cmd + Z) | Undoes the last change in the window. |
Reading the marks
| What you see | Meaning |
|---|---|
| Sky-blue, orange or pink mark | A joint on the character's left side, right side, or center. |
| Filled mark | A position you placed or moved. |
| Dashed ring | A suggestion or estimate you have not touched. |
| White outline | The current joint. |
| Red outline with ✕ | The joint has an error in Things to Check. |
| Small green, yellow or red dot | Where the joint ended up after the depth calculation. A dashed line connects it to your mark when they are apart. |
The legend under the viewport explains the dot colors: Placed where clicked (green), Moved to an edge or split (yellow), No body underneath (red) and Auto suggestion.
For a humanoid, joints the window could not suggest start as estimates from an eight-heads-tall body. They count as empty until you place them.
Symmetry and the centerline (Humanoid)
With Symmetry on (the default), one mark places both joints of a left-right pair, mirrored across the centerline. Turn it off to place the left and right joints separately.
The centerline is the dashed vertical line. It starts on the object's symmetry plane when that plane divides the model into left and right. Drag the handle at its top to move it — torso marks on the line move with it. Reset Centerline puts it back where it started. If the centerline no longer matches the object's symmetry plane, Things to Check warns that Weight Mirror and symmetric editing may not line up after Apply.
Suggest Again, Undo and Start Over
| Button | Description |
|---|---|
| Suggest Again | Suggests the joints again for the current view and replaces only the suggestions you have not moved. |
| Undo | Undoes the last change in this window. The window keeps its own history, separate from Unity's Undo. |
| Start Over | Discards all marks and starts again from the suggestions. Undo brings them back. |
Depth
For a humanoid, turn on Depth to look at the model from the side and adjust how deep the joints sit.
- Drag a joint left or right to change only its depth. Its height and side stay as placed in the front view.
- Right-click it, or press Delete, to return it to the automatic depth.
- A filled handle has a depth you set. A dashed handle uses the automatic depth.
- While you drag a torso joint, the arms are hidden so they do not block the view.
Click Back to Front or turn Depth off to return to the front view.
Tail
- Humanoid — Tail is off by default. Turning it on switches to a side view, Side View — Tail Only. Use Set Side to show the side where the tail is clearest, then place Tail Start, where the tail leaves the body, and Tail End, the tip. Back to Front returns to the front view, and Side (Tail) takes you back to the tail.
- Quadruped — Tail is on by default. Place Tail Start and Tail End in the side view with the other joints.
The tail bones — Tail01, Tail02, … — follow the middle of the tail between the two marks. If the window cannot find the tail's middle line, the bones are placed on a straight line and you are told so after Apply.
Turning Tail off keeps the marks but builds no tail. If Tail is on and a tail mark is missing, Things to Check says Place both tail marks or turn the tail off.
Fingers
For a humanoid, place the Wrist and Elbow first. Then turn on Fingers to open a close-up view of a hand.
Place the root and the tip of each finger. Finger 1 is on the thumb side.
| Control | Description |
|---|---|
| Left Hand / Right Hand | Switches the hand. |
| Count | Number of fingers, 1 to 5. It starts at the number found on the mesh, shown as Found on mesh: N, or 5 when none is found. |
| Mark Each Knuckle | Off: place only the root and the tip of each finger, and the knuckles are placed automatically. On: place the knuckles too. |
| Finger rows | Finger 1 (Thumb), Finger 2, … with chips for Root, Knuckle 1, Knuckle 2 and Tip. Click a chip to choose what your next click places. A finger's name turns red or yellow when it has a problem. |
| Link Left and Right | Same as Symmetry: a hand without marks of its own mirrors the other hand. |
| Suggest Again | Replaces only the finger suggestions you have not moved. |
| Clear This Hand | Removes every finger mark of this hand. |
| Undo | Undoes the last change in this window. |
- Roots are blue circles, knuckles amber diamonds and tips red triangles. Untouched suggestions have a dashed ring.
- A hand that mirrors the other hand has a green outline and the note Mirrored from the other hand. Click in the view to edit this hand.
- A hand with no finger marks gets only a hand bone. Place marks, or press Suggest Again.
- You do not have to open both hands. On Apply, a hand you never opened uses the finger positions suggested from the mesh.
Click Back to Front or turn Fingers off to return to the front view.
The fingers are named after Unity's Humanoid bones, from the thumb side. The thumb gets two bones (Proximal, Intermediate); the other fingers get three (Proximal, Intermediate, Distal) — for example LeftIndexProximal.
| Count | Fingers |
|---|---|
| 5 | Thumb, Index, Middle, Ring, Little |
| 4 | Thumb, Index, Middle, Little |
| 3 | Thumb, Index, Little |
| 2 | Thumb, Index |
| 1 | Index |
Things to Check
Things to Check lists what the window found, each line starting with the joint it concerns. Red lines are errors and block Apply. Yellow lines are warnings and gray lines are information. When everything is fine, it shows Nothing to check.
| Message | What to do |
|---|---|
| There is no body under this mark. | Move the mark onto the model. Blocks Apply. |
| Place this joint. | The joint is still empty. Place it. Blocks Apply. |
| Left and right marks are mixed across the centerline. | A left joint is on the right side of the centerline or the other way round. Check the marks and Character faces. Blocks Apply. |
| Only skin off the body's middle (a wing or a leg) is under this mark; place it on the body. | Move the torso mark onto the body. Blocks Apply. |
| The mirrored joint has no body under it. | The mirror image of the mark misses the model. Turn Symmetry off and place that side yourself, or adjust the centerline. |
| The adjusted depth is outside the body. | In Depth, drag the joint back inside, or right-click it for the automatic depth. |
| Skipped a thin layer (clothes or hair) in front and placed inside the limb. | Information. Check the joint if the layer is actually part of the body. |
| Legs overlap; split front and back. | Information. The legs overlap in the side view, so the space was split between them. |
| The mirror plane differs from the object's symmetry plane. Weight Mirror and symmetric editing may not line up after Apply. | Click Reset Centerline, or fix the object's symmetry plane. |
| The symmetry plane is horizontal; using the detected mirror plane. | The object's symmetry plane cannot divide left from right in this orientation, so the window uses the mirror plane it found itself. |
| This suggestion is not over the body's middle, so it is not used; place it yourself. | Place the joint by hand. |
| The head direction and the marks point opposite ways. | Check Head (Left / Right). |
| The up axis set here is not the world up axis, so the bones will lie sideways in the scene. If the character should stand upright, check Pitch and Roll. | Fix Pitch and Roll, or ignore it if the model really lies down. |
| Finger N needs a root and a tip. | Place both marks of that finger. |
| The mirrored finger N is outside the skin. | Edit that hand yourself. |
| No fingers were found on this hand; only the hand bone will be made. | Place the fingers, or accept a hand without fingers. |
| Not every finger of this hand could be placed, so only the hand bone will be made. | Complete the fingers of that hand. |
| Place both tail marks or turn the tail off. | Place Tail Start and Tail End, or turn Tail off. |
Under the list, N joints placed · M as suggested shows how many joints are placed and how many of them are untouched suggestions.
Apply
Apply is enabled when there are no errors. While there are, the text above it reads Fix the red marks to apply.
Click Apply to build the skeleton. The window closes when it succeeds. If it fails, everything is undone, the window stays open and the reason is shown above the button. What Apply does is described in Build Bones Tool.
When the window closes by itself
Only one Anchor Window is open at a time. It closes when you:
- switch to another rigging tool or select another object,
- change the mesh — by editing it or with Unity's Undo,
- enter Play mode, or switch the Rigging tab to Object mode.
Your marks are not lost. The window remembers them until you quit Unity and restores them when you open it again for the same object and Body Type, as long as the mesh has not changed.
Tips
- The window skips thin layers in front of a limb, but a thick sleeve, coat or hair volume can still be taken for the body. For such models, check the joints in Depth.
- Keep Symmetry on for symmetric characters, and leave the centerline on the object's symmetry plane. Weight Mirror and symmetric weight editing then line up with the new bones.
- You can close the window, fix something in the Scene view and open it again — as long as the mesh does not change, your marks come back.
See also — Build Bones Tool · Symmetry · Auto Weight Tool · Rigging Mode
